This problem will encounter problems as long as it is a machine processing counterpart. There are many reasons for this problem. It is best to run out the cpk value… Read More »There is a problem with CNC machining accuracy. These steps can be used to find out the cause.

Ⅰ. Handwheel failure reason:1.Poor contact of handwheel shaft selector switch2. Poor contact of handwheel override selector switch3. The handwheel pulse generator is damaged4 .Broken handwheel cable Ⅱ. X Y Z… Read More »15 common fault diagnosis and countermeasures of CNC machining center.

CNC engraving machine is good at small tool finishing, with the ability of milling, grinding, drilling and high-speed tapping, and is widely used in 3C industry, mold industry, medical industry… Read More »The knowledge that CNC engraving machining must learn!

01 Start-up preparation Every time the machine tool is turned on or reset by emergency stop, it first returns to the reference zero position of the machine tool (ie, return… Read More »The whole process of CNC machining center operation!

Each tool will take different machining parameters for different machining materials. In the field of milling, tool manufacturers aim to improve processing efficiency by optimizing tool material and developing more… Read More »How does CNC machining calculate speed and feed?

First of all, CNC machining is suitable for most precision parts machining in aviation, marine, automotive, medical, industrial and other fields. CNC machining has high precision, fast efficiency and stable… Read More »What kind of parts are suitable for CNC precision machining?

Usually in the industry, the machining process specification is one of the process documents for the processing process and operation methods. It is a process document that writes a more… Read More »Commonly used tips in CNC machining are worth collecting.

In metal cutting, there will be different workpiece materials, and different materials have different cutting formation and removal characteristics. How can we grasp the characteristics of different materials? ISO standard… Read More »How do different metal materials cut differently?

1.The common problem of over-cutting of the spring knife in processing In the process of machining, there is often the phenomenon of overcutting at the corners. If a reasonable tool… Read More »CNC machining is always over-cutting, how to control it?