Usually in the industry, the machining process specification is one of the process documents for the processing process and operation methods. It is a process document that writes a more… Read More »Commonly used tips in CNC machining are worth collecting.
In metal cutting, there will be different workpiece materials, and different materials have different cutting formation and removal characteristics. How can we grasp the characteristics of different materials? ISO standard… Read More »How do different metal materials cut differently?
1.The common problem of over-cutting of the spring knife in processing In the process of machining, there is often the phenomenon of overcutting at the corners. If a reasonable tool… Read More »CNC machining is always over-cutting, how to control it?
I. General rule of knife path: Rough opening: Under the maximum load of the machine tool, in most cases, the largest possible knife, the largest possible feed amount, and the… Read More »CNC machining does not understand these, how can it be done?
1. The speed of the white steel knife should not be too fast.2. Copper workers should use less white steel knives and more flying knives or alloy knives.3. When the… Read More »CNC machining skills, you will make a fortune after reading it!
1. The workpiece size is accurate and the surface finish is poor. Causes of failure: The tool tip is damaged and not sharp; the machine tool resonates and the placement… Read More »CNC machining accuracy problem, what happened?
In CNC machining, the rotation direction of the milling cutter is generally unchanged, but the feed direction is changed. There are two common phenomena in milling: down milling and up… Read More »Should CNC machining choose down milling or up milling?
In CNC milling, vibration may occur due to the limitations of cutting tools, tool holders, machine tools, workpieces or fixtures, which will have certain adverse effects on machining accuracy, surface… Read More »Causes and Countermeasures of CNC Machining Vibration Problems
1. Workpiece overcut: reason:1. Bounce the knife, the strength of the knife is not too long or too small. Causes the knife to bounce.2. Improper operation by the operator.3. The… Read More »Do you know how to deal with these problems in CNC machining?
Thread machining is one of the most important applications of CNC machining centers. The machining quality and efficiency of threads will directly affect the machining quality of parts and the… Read More »Several thread processing methods commonly used in CNC machining centers!